ANCEL S300 Automotive EVAP Smoke Machine Diagnostic Vacuum Leak Detection Tester

EUR 139,56 Compralo Subito o Proposta d'acquisto, Clicca per vedere il costo di spedizione, Garanzia cliente eBay
Venditore: super-diag ✉️ (14.481) 99.3%, Luogo in cui si trova l'oggetto: Houston, Texas, US, Spedizione verso: US e molti altri paes, Numero oggetto: 115732547177 ANCEL S300 Automotive EVAP Smoke Machine Diagnostic Vacuum Leak Detection Tester.

        Ancel S300 Advanced Features   【BUILT IN AIR PUMP】 No air compressor needed. Just connect staright to your vehicle's 12V battery and generate smoke in seconds!
【Build in Pressure gauge 】 to monitor total sytem pressure . Smoke mode to introduce smoke into vehicle system for leak detection. 【 Adjustable Flow Meter】Air Flow meter with ajustable button, easy to control the smoke effect(output flow:<7L/Min) 【Portable & easy to use 】

Dual Mode 
No need to buy extra air compressor !
Air Mode: Air mode can help you test whether there is a leak in the pipe by injecting air into the pipe, and judge by the sound made when the air leaks. Own a S300 air conditioning leak detector, you don't have to buy additional air compressor or air pump, which makes your diagnosis easy and cost-effective.
Smoke Mode: Smoke mode help you lacate the leak accuarately through the visible smoke. The smoke can be produced within seconds, dramatically reducing diagnostic time.

BUILT IN AIR PUMP

No air compressor needed. Just connect staright to your vehicle's 12V battery and generate smoke in seconds !

Pressure Gauge 
No Leak: When the value of the pressure gauge remains unchanged, it indicates that there is no leakage in the system.
Small Leak: When the value of the pressure gauge drops, it indicates a small leak in the system.
Massive Leak: When the value of the pressure gauge reaches zero, it indicates a massive leak in the system.

Adjustable Flow Meter

Air Flow meter with ajustable button, easy to control the smoke effect(output flow:<7L/Min)  

Wide Coverage 

Suitable for all domestic cars, motorcycles, snowmobiles, off-road vehicles, beaches. Cars, light trucks and speedboats, etc. Using together with automotive diagnostic tool, you can find the vehicle problem accurately and diagnose fault.

How to do leakage test?

1. Turn OFF the ignition of the vehicle.
LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF
2.Dismantle the air filter and the throttle connections.
3.Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake 
Adapter into the opening
4.Connect the Power Cord to 12V vehicle battery.
5.Now the Power LED would be ON, if else check the power supply.
6.Introduce the smoke nozzle into the system via the Adapter Cone
7.Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the 
Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge & Flow Meter
8.Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone Adapter when there’s obvious smoke coming out of the smoke nozzle
9.The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp to assist
10.After test, press Smoke Control Switch again to stop the unit from generating smoke and 
press Air Control Switch to stop generating pressurized air
11.Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit or make it stand in UPRIGHT position only. Do NOT lay it down.

Smoke Oil Choose
The equipment is compatible with mineral oil based baby oil like Johnson & Johnson Pink bottle. Pure #5 white oil is the best choice if available.


Caution !!!

1.When you use this Ancel S300 Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range. 

2.The testing liquid : both liquid paraffin and baby oil are OK.

3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.

4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.

5.During the process of leak detection, please keep away from smoke-sensitive parts.

6.Do NOT run the detector over 8 minutes continuously. It needs interval rest.

7.The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later. 

8.The round part of this detector has temperature, please be careful to avoid burns.

9.If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

10. Please do not fill full the test oil when the test to avoid oil leakage and splashing. Just pour in two thirds of the test oil.

Specifications
Power source: 12V fully charged vehicle battery
Current: 6A
Flow rate: < 7 LPM
Pressure output: 0.8~1.0 bar

 

 

Warning !!!

- Operator shall have basic knowledge about structure of vehicle and the engine. Vehicle service book is required.

- To ensure better test result, it’s required there’s no wind in the operating area.

- Do NOT use the product on smoke sensitive component. Eg. Smoke residual might reduce sharpness of head lights if apply to head light housing.

- ONLY low density mineral oil based fluid is allowed to use as smoke oil. Johnson&johnson’s baby oil(pink label) is compatible. Use funnel to avoid spread the oil to other parts of the unit.

- Check oil level before use, if oil level is lower than the middle of the gauge, the unit would need a refill, but do not overfill the unit beyond the gauge.

- The product is only allowed to use while ignition’s off.  Be sure to use 12V vehible battery, and the battery shall be full charged and voltage not lower than 12V.

- Use bright light torch/ halogen light to help find the leaks.
Wear goggles if available

 

            PaymentDelivery detailsTerms of salesAbout usContact us Payment

We accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. 

Please contact us if you need to use another method to pay.

Payment should be made within 7 days after bidding ends.

Otherwise a Unpaid Item case will be opened to you.

We are not responsible for buyers’ local taxes.

Please include your special requests in eBay note if there is any.

   

 

Delivery details Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA, From our US warehouse via UPS or USPS shipping.
Delivery time varies from 2 to 5 business days.
We will ship according to your eBay address.
Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.  

 

 

Terms of sales Return Policy
Please return the item within 60 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions.  

We are authorize distributor, our all items are 100% original and Our devices have warranty,
5 Year free repair for the devices.

  Please contact us firstly when you need warranty service.

In case an item arrives faulty, please contact us as soon as possible and keep it unused.

We will instruct you on how to return and get refund or replacement.

If the item has been used, we have the right to decline your claim.

Items should be returned on buyers' cost for repair or replacement.

  About us

 

Who We Are?

We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics

for more than 10 years.

We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands,

and more brands will be show in our store in near future.

What Do We Have?

We have office and warehouse in US  to ensure fast shipment and after-sale service.

We have more than 100 employees devoting to customer satisfaction.
      Contact us

1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely.

2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)

3:Please leave us Positive Feedback and 5-stars★★★★★ after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too.

 

     
     
     
     
     
     
     
     
     
     
     

 

 

  • Condition: Nuovo
  • Warranty: 5 Year
  • output pressure: 0.8~1.0 bar
  • Vehicle Type: ATV, Heavy Duty/Commercial, Motorcycle, Passenger Vehicle
  • Manufacturer Part Number: Ancel S300 smoke tester
  • Item Type: Car Smoke Machines
  • Supported System: Intake System Test, Exhaust Systems Test
  • Supported System 1: Car Sealing Test, Fuel Tank System Test
  • Type: Smoke Leak Detector
  • Powerful features: Built-in air pump
  • Power source: 12V fully charged vehicle battery
  • OBD Interface: CAN, EOBD, OBDII
  • Country/Region of Manufacture: China
  • Smoke output value: 7l/min
  • Brand: ANCEL
  • Built-in Air Pump: Yes
  • Pressure Gauge: Yes
  • Adjustable Flow Meter: Yes

PicClick Insights - ANCEL S300 Automotive EVAP Smoke Machine Diagnostic Vacuum Leak Detection Tester PicClick Esclusivo

  •  Popolarità - 795 utenti che lo osservano, 2.1 nuovi utenti che lo osservano ogni giorno, 380 days for sale on eBay. Super quantità elevata osservato. 1.070 venduti, 10 disponibili.
  •  Miglior Prezzo -
  •  Venditore - 14.481+ oggetti venduti. 0.7% feedback negativo. Grande venditore con molto buone risposte positive e oltre 50 recensioni.

Persone Apprezzato Anche PicClick Esclusivo